Characterization of Particle Size Distributions of Powdery Building Material Aerosol Generated by Fluidization and Gravitation
|
| Title | Characterization of Particle Size Distributions of Powdery Building Material Aerosol Generated by Fluidization and Gravitation |
| Authors | |
| Abstract | This study aims to identify particle size distributions (PSD) of aerosol of powdery building materials commonly used in construction work (cement, chalk, clay, wood sawdust, wood grinding dust, gypsum, hydrated lime, masonry grout, quartz sand, sand and structural lime) by two aerosolization methods: fluidization and gravitation. Fluidization and gravitation methods represent industrial activities such as pneumotransportation and unloading. Both particle resuspension mechanisms have been modelled in laboratory conditions. The particle size distributions of resuspended particulate matter from powdery building materials were rather similar identified by both fluidization and gravitation methods, with an exception of wood sawdust and sand. The PM10 fraction ranged between 30% and 87%, PM2.5 from 7% to 28% and PM1.0 from 3% to 7% of the total mass of particulate matter. The highest PM10/PMtotal ratio was calculated for masonry grout - 0.87, and the lowest ratio for quartz sand - 0.30. The highest ratio of PM2.5/PMtotal was calculated for sand - 0.23, the lowest for quartz sand - 0.07. Substantial quantities of PM2.5 were found to be emitted implying a potential threat to human health.DOI: http://dx.doi.org/10.5755/j01.erem.61.3.1519 |
| Publisher | Kaunas University of technology |
| Date | 2012-10-11 |
| Source | Environmental Research, Engineering and Management Vol 61, No 3 (2012) |
| Rights | Copyright terms are indicated in the Republic of Lithuania Law on Copyright and Related Rights, Articles 4-37. |