Logo Goletty

Structural degradation of heterogeneous welded joints
Journal Title Materials Engineering - Materiálové in?inierstvo (MEMI)
Journal Abbreviation Mateng
Publisher Group The University of Žilina
Website http://ojs.mateng.sk
PDF (592 kb)
   
Title Structural degradation of heterogeneous welded joints
Authors Schmidová, Eva; Hanus, Petr
Abstract Developing the techniques of welding materials with higher dynamic strength onto the rolling surfaces of rails is one of the options for increasing their operational endurance. The subject of this paper is an analyses of heterogeneous weld interfaces experimentally manufactured by welding medium-carbon austenitic steels onto high-carbon unalloyed pearlitic steels. The analyses focus on examinations of the marginal mixing of the materials at the weld interface and the circumstances under which intercrystalline cracks form in the weld deposit layers. Structural analyses, chemical microanalyses and a hardness assessment were performed in order to identify the corresponding structural changes. The proportion of zonal vs. interdendritic segregation of the alloying elements in the degradation of the welded joint was distinguished. We described the nature of the structural heterogeneities produced, locally connected with the martensitic transformation. The chemical heterogeneity leading to the formation of martensite at grain boundaries was identified as the limiting effect.
Publisher Faculty of Mechanical Engineering University of Zilina, Slovak Republic
Date 2012-09-29
Source Materials Engineering - Materiálové inžinierstvo (MEMI) Vol 19, No 4 (2012)
Rights Articles published in this Open Acess Journal are licensing using Creative Commons License. Except where otherwise noted, individual articles in the Materials Engineering - Materiálové inžinierstvo journal are licensed under a CREATIVE COMMONS ATTRIBUTION-NON COMMERCIAL-NO DERIVS 3.0 UNPORTED LICENSE (for details please visit http://creativecommons.org/licenses/by-nc-nd/3.0/ ).Copyrights for articles published in Materials Engineering - Materiálové inžinierstvo (MEMI) journal are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work.Authors are permited to self-archive the final version of their published articles into institutional repositories. Authors can use the final version of published article for the non-exclusive distribution with an acknowledgement of its previous publication in this journal.Authors are allowed to post their work to institutional repositories prior to and during the submission (evaluation) process.

 

See other article in the same Issue


Goletty © 2024