PROTECTIVE LAYERS OF IRON AND NICKEL ALUMINIDES ON STEEL
|
| Title | PROTECTIVE LAYERS OF IRON AND NICKEL ALUMINIDES ON STEEL |
| Authors | |
| Abstract | Intermediary phases Ni-Al and Fe-Al are promising materials due to their superior properties such as hardness and good resistance against oxidation at high temperatures. Moreover, Fe-Al phases are resistant in sulphur - containing atmospheres. Because of these characteristics, the above mentioned intermetallic phases seem to be prospective for the use in many technical applications such as energetics, chemical or automotive industry in a form of a bulk material or coatings. Presently, the protective aluminide layer is usually prepared by thermal spraying. Nevertheless, this method is not suitable for complex-shaped components. Therefore, the aim of this work was to find an alternative way to prepare layers consisting of nickel or iron aluminides by other technique than thermal spraying. At first, carbon steel samples were coated using galvanic or electroless nickel plating. Coated samples were subsequently submerged into molten aluminium at various temperatures and process durations. The influence of the temperature and duration on the intermetallic phase growth was studied by scanning electron and light microscopy. Thickness and microhardness of the intermetallic layer was also measured. |
| Publisher | Faculty of Mechanical Engineering University of Zilina, Slovak Republic |
| Date | 2013-05-18 |
| Source | Materials Engineering - Materiálové inžinierstvo (MEMI) Vol 20, No 3 (2013) |
| Rights | Articles published in this Open Acess Journal are licensing using Creative Commons License. Except where otherwise noted, individual articles in the Materials Engineering - Materiálové inžinierstvo journal are licensed under a CREATIVE COMMONS ATTRIBUTION-NON COMMERCIAL-NO DERIVS 3.0 UNPORTED LICENSE (for details please visit http://creativecommons.org/licenses/by-nc-nd/3.0/ ).Copyrights for articles published in Materials Engineering - Materiálové inžinierstvo (MEMI) journal are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work.Authors are permited to self-archive the final version of their published articles into institutional repositories. Authors can use the final version of published article for the non-exclusive distribution with an acknowledgement of its previous publication in this journal.Authors are allowed to post their work to institutional repositories prior to and during the submission (evaluation) process. |