MECHANICAL CHARACTERIZATION OF FRICTION WLDED DISSIMILAR STEELS AT 1000 RPM
|
| Title | MECHANICAL CHARACTERIZATION OF FRICTION WLDED DISSIMILAR STEELS AT 1000 RPM |
| Authors | |
| Abstract | Joining of dissimilar metals is one of the most essential needs of industries. There are various welding methods that have been developed to obtain suitable joints in various applications. However, friction welding is a joining process that allows more materials and material combinations to be joined than with any other welding process. Continuous drive friction welding studies on austenitic stainless steel and ferritic steel combinations has been attempted in this investigation. Friction welding process parameter optimization, mechanical characterization and fracture behavior is the major contribution of the study. The microhardness across the weld interface was measured and the strength of the joint was determined with tensile tests and impact tests. Also the tensile fractured specimens were examined by scanning electron microscopy so as to study its fracture behavior. The experimental results indicate that axial pressure has a significant effect on the mechanical properties of the joint and it is possible to increase the quality of the welded joint by selecting the optimum axial pressures. |
| Publisher | Faculty of Mechanical Engineering University of Zilina, Slovak Republic |
| Date | 2013-05-18 |
| Source | Materials Engineering - Materiálové inžinierstvo (MEMI) Vol 20, No 3 (2013) |
| Rights | Articles published in this Open Acess Journal are licensing using Creative Commons License. Except where otherwise noted, individual articles in the Materials Engineering - Materiálové inžinierstvo journal are licensed under a CREATIVE COMMONS ATTRIBUTION-NON COMMERCIAL-NO DERIVS 3.0 UNPORTED LICENSE (for details please visit http://creativecommons.org/licenses/by-nc-nd/3.0/ ).Copyrights for articles published in Materials Engineering - Materiálové inžinierstvo (MEMI) journal are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work.Authors are permited to self-archive the final version of their published articles into institutional repositories. Authors can use the final version of published article for the non-exclusive distribution with an acknowledgement of its previous publication in this journal.Authors are allowed to post their work to institutional repositories prior to and during the submission (evaluation) process. |